01
Lights on
The plate charges from normal indoor lighting.
NightBloom Prime
Find Your Light Switch in the Dark.
A premium glow-in-the-dark Decora switch plate that charges from ordinary room light and helps you navigate your home at night.
No batteries
Under 1-minute install
Handmade in Colorado
A small problem, solved well
Stop searching the wall in the dark.
NightBloom Prime surrounds your switch with a soft visible glow after the lights go out, making the switch easier to locate without reaching for your phone or turning on another light.
How it works
Light in. Glow out.
NightBloom Prime absorbs ordinary room light and releases it gradually after the room goes dark.
02
Lights off
The glow becomes visible immediately.
03
Demonstration video
Hand finds switch instantly
Find it instantly
A short demonstration video can replace this panel later.
Designed for nighttime
A practical upgrade that disappears into your home.
Find switches without turning on lights
Locate the switch faster in bedrooms, hallways, bathrooms, and guest rooms.
Charges from ordinary room lighting
No dedicated charger, wiring, or electrical connection is required.
No batteries
No battery replacements, electronics, or ongoing maintenance.
Installs in under a minute
Remove the existing cover and attach NightBloom Prime using standard wall-plate screws.
Fits standard Decora switches
Designed for the common rectangular rocker-style switch format.
Handmade in Colorado
Produced in small batches and inspected before shipment.
Installation
One minute. Two screws. Done.
-
1
Remove the existing wall plate
Use a screwdriver to remove the two standard wall-plate screws.
-
2
Position NightBloom Prime
Place it over your standard Decora switch.
-
3
Reinstall the screws
Tighten gently until the plate sits securely against the wall.
The nighttime home upgrade
NightBloom Prime
$29
Premium glow-in-the-dark switch plate for standard Decora switches. Handmade in Colorado and ready to install.
- Fits standard single-gang Decora switches
- Charges from normal room light
- No batteries or wiring
- Mounting screws supported
- Small-batch production
Secure checkout through Ko-fi.
Questions
Frequently asked questions
Will it fit my switch?
NightBloom Prime is designed for a standard single-gang Decora switch—the common rectangular rocker-style switch. It is not intended for traditional toggle switches or duplex outlets.
How long does it glow?
Glow brightness and duration depend on how much light the plate receives beforehand. It is brightest immediately after the room goes dark, then gradually dims over time.
Does it need batteries?
No. The glow material stores energy from ordinary light and releases it after the lights are turned off.
How do I install it?
Remove the two screws from your existing wall plate, place NightBloom Prime over the switch, and reinstall the screws. Installation typically takes less than a minute.
What material is it made from?
NightBloom Prime is made from a durable glow-in-the-dark polymer selected for its luminous performance and clean finished appearance.
Make the dark easier to navigate